Can someone tell me how can I print the back cover? Whenever I click download file, it sends me to google drive and I can only open the whle helmet without the back cover.
First print from these peeps...I would double check sizing prior to printing. These are still very small even with the so called "upscale"...I have scaled up 110% and my print will be a very tight fit, if it even fits. I've checked both face cut model and the stationary version. I have an average size head nothing abnormal.
I mean scaling should go without saying when printing a large project. Seldom you’ll get that lucky and everything will just fit. I’m printing at 100% and it seems a little big honestly.
Wow, you brought my dream to reality. Unfortunately the parts are too large to print on Ender 3 size printers, it will be very helpful if you release a version which can be printed on Ender 3 size printers. I understand that your time is much valuable than people like us so there there won't be any hard feelings even if you don't grant my wishes :)
I want to update my comment about the size of helmet for starboost, there is a new version with faceplate separate and helmet is already resized to bigger size
Yes I reprinted the faceplate version the way it appears on the build plate, perfect with some extra room for padding.
My upper body is being printed at 110% and all my arms and legs at 100%
I'm 6 foot tall bang on.
But very slim and this suit is huge lol, I only have 4 bits left to print, might have to reprint hands, elbow and neck TPU parts in PLA for back ups as I will be modding parts all over the suit for lights, voice changer, smoke, and sounds.
I'm nearly at the stage where it gets turned into a wearable suit, really looking forward to it but I'm a bit burned out from printing night and day non stop since the printer arrived 17 rolls of filament since I started this suit lol
Printed! Unfortunately I will need to print again because I didn't measure well enough, but it looks fantastic! Is there any possibility they helmet with be updated at some point with the eyes already attached as a seamless piece (I know not practical for actual seeing through it), I have plans to try to cast the whole head in clear resin and then metalize to make the whole faceplate a sort of visor, to get that real astronaut look.
Thank you DO3D for the helmet and of course for the upcoming, updated armor. Also a big thank you to Frank who chose the armor as winner of the contest!
I am very grateful for your work for free. It is the most rare mark. I will print the FULL body and make a VDO for you and work hard to repay you. Thank you very much. From 1 Thai person
@Do3D.com this is awesome. Just bought an ender 3 pro to start off with the hobby. I hope I can print the full body so I could have it on my office. Thank you so much guys.
I've shared your blog with my colleagues. They've found it valuable too!
SmallPDF Free Key 2024
I don't Know if anyone reads this forum, But for the included motorization kit what motors should I use?
Is this file no longer available? The links dont work
thanks so much am gonna 3D print it and wait for the full suit thanks
Can someone tell me how can I print the back cover? Whenever I click download file, it sends me to google drive and I can only open the whle helmet without the back cover.
Hi I'm 14 and have a pretty normal sized head do I need to scale it up or down or will the helmet fit me right off the bat
i cant download the file
First print from these peeps...I would double check sizing prior to printing. These are still very small even with the so called "upscale"...I have scaled up 110% and my print will be a very tight fit, if it even fits. I've checked both face cut model and the stationary version. I have an average size head nothing abnormal.
Wow, you brought my dream to reality. Unfortunately the parts are too large to print on Ender 3 size printers, it will be very helpful if you release a version which can be printed on Ender 3 size printers. I understand that your time is much valuable than people like us so there there won't be any hard feelings even if you don't grant my wishes :)
Looks great
Update
I want to update my comment about the size of helmet for starboost, there is a new version with faceplate separate and helmet is already resized to bigger size
we can give you the eye attached version, please contact info@do3d.com to request. Thank you.
Lol mine was the same, also looks great, can be turned into an awesome desk/cabinet display piece, and practice for the big one.
I had to start my full suit build all over again, my dog smashed mine into pieces lol
I'm going 3 walls thick on everything now.
Good luck on your next helmet, I have to print everything 110% , so if you have a bit of a pumpkin head you might want to go 115%, or 120%.
Printed! Unfortunately I will need to print again because I didn't measure well enough, but it looks fantastic! Is there any possibility they helmet with be updated at some point with the eyes already attached as a seamless piece (I know not practical for actual seeing through it), I have plans to try to cast the whole head in clear resin and then metalize to make the whole faceplate a sort of visor, to get that real astronaut look.
awesome stuff
Just started the helmet 34 hours left.
Thank You for the revised helmet. Exciting stuff.
hola, gracias por compartir esto... cuales serian los mejores parametros para imprimirlo...alturade capa, relleno , etc..
comenzare a imprimir
gracias
The version with the face plate is missing the hexagonal texture on the left temple. Can you fix this, please?
think im gonna wate for the cut faceplate before I print
Thank you DO3D for the helmet and of course for the upcoming, updated armor. Also a big thank you to Frank who chose the armor as winner of the contest!
How can I receive files from?
This is so cool guys! My Creality cr10s s5 huge (50x50x50cm) printer cant wait to print the whole suit!
muchisimas gracias
Where is the link?? =(
G
super travaille encore merci et continué comme ça ses génial (ps) un mk6 serai génial
OMG. Thank You. It’s one of my favorite iron man look.
merci beaucoup pour ce tres beaux casque .a voir pour la suite.
merci de la france
I am very grateful for your work for free. It is the most rare mark. I will print the FULL body and make a VDO for you and work hard to repay you. Thank you very much. From 1 Thai person
I've been following you guys for a couple of years now. You guys do amazing work!
i wish the mk42 files would be so good looking like that helmet. This is really a nice clean helmet :)
Thank you!!!!! Full body? You have my full attention now!